LiFePO4 48V 100Ah Battery Pack 51.2V 5KWH 6000+ Cycle Max 15 Parallel BMS 100A 16S PC Monitor Inverter Battery With CAN RS485
Features：
◆ The battery adopts high-performance lithium iron phosphate battery with high safety performance and long service life.
◆ External weak current switch reduces product power consumption and improves the safety of transportation and storage.
◆ With RS485/CAN communication function, it can easily communicate with the equipment with communication.
◆ External wireless module can be connected for remote data monitoring and corresponding control.
◆ lt has multiple protection functions to protect the safety of p.ower supply inan all-round way.
◆ The output is stable and can be connected to different loads with in the voltage rang.
◆ Support up to 15 independent modules for parallel use.
|
Model No.
|
51.2V-100AH
|
51.2V-200AH
|
|
Voltage
|
51.2Vdc
|
|
Capacity
|
100Ah
|
200Ah
|
|
Energy
|
4.8KWh/5.12KWh
|
9.6KWh/10.24KWh
|
|
Max. Charge voltage
|
54.75V/58.4V
|
|
Cut-offDischarge voltage
|
39.0V/42.0V
|
|
Stand. Chargecurrent
|
50A
|
50A
|
|
Max. Chargecurrent
|
100A
|
100A
|
|
Stand. Discharge current
|
100A
|
100A
|
|
Max. Discharge current
|
100A
|
100A
|
|
Peak Discharge current
|
150A
|
150A
|
|
Protections
|
OVP/UVP/OCP/OTP/UTP/SCP etc.
|
|
Communication
|
RS485/CAN
|
|
Work temperature
|
Charge: 0℃~45℃
|
|
Discharge: -15℃~60℃
|
|
Storage temperature
|
0℃~45℃@ 60±20% Relative Humidity
|
|
Protection grade
|
IP21
|
|
Dimensions(L*W*H)
|
442*400*223mm
|
442*680*223mm
|
|
442*420*133mm
|
442*680*133mm
|
|
Weight
|
44-50kg
|
90-100kg
|
Battery lifepo4 Installation notes：
Before installation, please read this manual carefully and familiarize the installation steps.
(1) Be sure to leave a certain space around for heat dissipation during installation.
(2) Avoid sunlight direct and rainwater infiltration during outdoor installation to cause battery damage.
(3) Do not place metal products near the place of the energy storage LiFePO4 battery installation to prevent short circuits.
(4) Virtual connection points and corroded wires may generate high heat, and the molten insulation layer will burn surrounding materials and even cause a fire. Therefore, it must be ensured that the connector has been tightened and the wires should be secured with cable ties to avoid loosening of the connector due to shaking during mobile applications.
(5) After the battery switch is turned off,there is still high voltage inside the energy storage case.Please do not open or touch the internal components, and external short circuit is strictly prohibited.
(6) Please do not install it in a harsh environment where a large amount of damp, greasy, flammable and explosive dust gathers.
(7) lt is forbidden to reverse the charging and discharging terminals of the battery, other wise it is very easy to damage the battery or cause unpredictable risks.
(8) lf an injury occurs during installation or use, please seek medical attention in time.
